16-Port G.fast DPU Support Enclosure with Primary Protection
Comtest Networks, known as the premier solutions provider in the Telecommunications industry, introduces the G.fast DPU Solution Enclosure specifically designed for G.fast NID-TJ and Primary Protectors.
G.fast is a technology which promises to deliver gigabit speeds over standard twisted pair Telco cables.
G.fast plans to raise the max link speed to 1Gbps on twisted pair, using 106 MHz of bandwidth and is the technology that will finally bring superfast broadband speeds to those areas only served by copper wires in the last mile. In most deployments, the G.fast DPU requires a support box at the customer premise/MDU or Business office end. Comtest’s G.fast DPU enclosure provides this solution for DPU’s and small business campus locations.
The Comtest G.fast DPU enclosure is specifically designed for using coax in any MDU type environment. The innovative design provides the space and ease to manage the feed cable from the G.fast DPU as well as the twisted pair cables for distribution to the customer.
The compact design of the enclosure is constructed using high impact and flame retardant plastic. Installation is easy with 4 x 1” entry/exit ports and 180 degree hinged lid for full access. The enclosure is designed to be used indoors and outdoors and is weather-resistant against weather hazards such as rain, sleet and snow.
The enclosure comes pre-configured with 36 G.fast Primary Protectors (SA-4705-0001) pre-wired to 8 DUAL G.fast NID-TJ.
- Support up to 16 subscribers with primary protection on POTS and LINE ports
- Supports up to 4 slots for protection for optional strand power
- Can be mounted indoor or outdoor
- Faster and easier access with 4 x 1” entry/exit ports
- Easy and open access for installation and repair
- Allow 24/7 secure access for service technicians
- Deploy quickly and easily with External Wall and Pole Mounting Brackets
- Provides easy and secure access via a hinged lid and snap lock
|Dimensions||101mm(H) x 54mm(W) x 23mm(D)
4” x 2 1/8” x 15/16”
|Operating Temperature||-40 to +65 °C
-40 to 149 °F
|Humidity||5 to 95% (non-condensing)|
|Mounting||External wall and pole mounting brackets|
|Capacity||Supports up to 16 subscribers|
|Compliance||Enclosure is complaint to Nema Type 3R|
|Configuration||Enclosure comes pre-configured with 36 SA-4705-0001 G.fast Primary Protectors, pre-wired to 8 DUAL G.fast NID-TJ|